Professional HVAC Inspection Services in Waco, TX
Indoor comfort complaints from family members or employees usually lead back to the HVAC system. Our techs bring testing tools built for HVAC inspections. We start by checking the HVAC equipment for visible damage or wear. The work causes little disruption, so your household or staff can carry on with the day. We then measure airflow and temperature to see whether the system is delivering what it should. Our checks cover performance, safety, and anything that may shorten the system's life. A written report helps you plan any next steps for the system. The specific HVAC inspection services we handle for homes and businesses are listed below.
Annual HVAC Inspection in Waco
Systems that run most of the year build up wear on capacitors, contactors, drain lines, and coils between service visits. Our team performs a yearly checklist that covers the thermostat, outdoor condenser, indoor air handler, drain system, and accessible ducts. We measure capacitor values, motor amperage, refrigerant pressures, and the temperature split across the coil. The drain line gets flushed and the float switch tested during the visit, and filters get changed when needed. When the inspection reveals that the blower wheel and coil have collected dust over the year, we can perform HVAC duct cleaning on the connected system before the cooling season starts. Booking an HVAC annual inspection before peak cooling season catches worn parts while replacements are easy to schedule. Your system runs more reliably, and the report gives you a dated record for warranty purposes.
HVAC Duct Inspection in Waco
Ductwork hides in attics and walls, so leaks, crushed runs, and dust buildup go unnoticed while they cut airflow and raise power bills. Waco Air Duct Cleaning Pro inspects each accessible duct run in the attic and sends a camera through the supply and return branches. An HVAC ductwork inspection also checks insulation, register boots, plenum seams, and support straps. We measure airflow at the registers and static pressure at the air handler to confirm what the visual inspection shows. Each problem gets photographed with its location, and the findings note whether the duct size matches the equipment it serves. You learn whether the ducts need cleaning, sealing, or repair before you spend on any of them.
Commercial HVAC Inspection in Waco
Commercial rooftop units, split systems, and air handlers run long hours, and a failure during business hours costs more than the repair itself. Our crew inspects each unit's compressor, condenser coil, belts, economizer, filters, and electrical connections. We check refrigerant pressures, supply air temperatures, and outside air damper operation for every zone. Each unit gets a condition rating and a list of recommended repairs ranked by urgency. Units nearing the end of their service life get flagged with an estimate of remaining years so replacements can be planned. Inspections run before or after business hours on request. Facility managers get a building-wide report for planning maintenance budgets and avoiding emergency calls.
HVAC Inspection When Buying a House in Waco
A standard home inspection usually gives the HVAC system a quick look, and buyers often learn about a failing AC only after closing. Our pros perform a detailed HVAC real estate inspection that checks equipment age, condition, refrigerant type, and cooling performance. We test the system under load, measure the temperature split, inspect the ducts with a camera, and look for signs of leaks or past water damage. When the camera reveals microbial growth on the coil or plenum, we can perform HVAC mold remediation as part of the inspection follow-up. The report lists estimated repair costs and the expected remaining life of each major component. Inspections get scheduled within your contract's inspection period, and your agent can receive a copy. You negotiate with real numbers and avoid surprise replacement costs in your first summer.
HVAC Installation Inspection in Waco
New HVAC equipment only performs as rated when it gets sized, charged, and connected correctly. We perform an HVAC inspection after installation to verify refrigerant charge, airflow, electrical connections, and drain setup, whoever installed the system. The technician compares the unit's capacity with the home's cooling load and checks that the duct system can deliver the airflow the equipment needs. When the ductwork behind the new equipment shows crushed runs or undersized branches, we can complete air duct replacement on those sections before sign-off. Line sets, disconnects, condensate traps, and secondary drain pans get checked against code requirements. Each issue gets documented with photos so the installer can correct it under warranty. You confirm that your new system works as designed early in the warranty period.
HVAC Furnace Inspection in Waco
Furnaces and electric heat strips sit idle for most of the year in warm climates, and dust settles, sensors corrode, and ignition parts weaken during that downtime. Our team inspects gas furnaces for burner condition, flame sensor function, heat exchanger cracks, and proper venting. Electric air handlers get their heat strips, sequencers, and high-limit switches tested for safe operation. We measure carbon monoxide at the flue and near the furnace on every gas unit. Filters and blower settings get checked so heat moves through the home evenly. Your heating system starts safely on the first cold morning, without a burning smell or a tripped breaker.
HVAC Permit Inspection Support in Waco
New installations and duct replacements need a city or county inspection before the permit closes, and failed inspections delay projects and add fees. Waco Air Duct Cleaning Pro pre-inspects permitted work against the Waco Building Code and local amendments before the official visit. For an HVAC rough in inspection, we check duct supports, sizing, sealing, and clearances while walls and ceilings are still open. At the final stage, we confirm that equipment labels, disconnects, condensate disposal, and duct leakage test results are ready for the HVAC final inspection. Our technician can meet the inspector on site and answer questions about the work. Projects go into the city inspection for HVAC prepared, which cuts down on repeat visits.
Heat Pump Inspection in Waco
Heat pumps handle both cooling and heating, so their reversing valves, defrost controls, and outdoor coils work year-round with little rest. Our crew tests the system in both cooling and heating modes and checks that the reversing valve switches cleanly. We inspect the outdoor coil, fan motor, defrost board, and auxiliary heat strips, and measure refrigerant pressures in each mode. The thermostat gets checked for correct heat pump settings, since a wrong setting can run the heat strips constantly and raise power bills. Every finding goes into a report with recommended fixes. Your heat pump runs efficiently in both seasons, and small faults get fixed before they stop the system.
Free HVAC Inspection Near Me in Waco, TX
Homeowners searching for an HVAC duct inspection near me want a local technician who checks the full system and explains the results in plain language. Waco Air Duct Cleaning Pro serves Waco and nearby areas including Brook Oaks, Castle Heights, and Dean Highland with free basic system checks and detailed inspections for homes and businesses. Call (254) 277-1371 to book your inspection today.
About Our City Waco
Residents and businesses throughout Waco can rely on our team for air duct cleaning and ventilation-care services. We proudly serve local areas such as Brook Oaks, Castle Heights, and Dean Highland, helping customers address dusty registers, buildup inside accessible ducts, and questions about system cleanliness. Our work centers on thorough inspection and cleaning of relevant duct and vent components, giving property owners a straightforward way to maintain their heating and cooling air pathways. We aim to make the process straightforward by explaining which ventilation sections need attention.
Cost of HVAC Inspection in Waco, TX
A basic visual system check comes free with any booking, while detailed inspections with testing and written reports carry a fee. The typical HVAC inspection price in Waco runs between $100 and $250 for a home, and real estate, commercial, and code-readiness inspections cost more. When you pair a visit with duct or coil cleaning, your HVAC inspection and cleaning cost gets quoted as one flat price.
| Service | What is Included | Typical Cost |
|---|---|---|
| Basic system check | Visual inspection of equipment and filter | Free with booking |
| Annual inspection | Electrical tests, refrigerant pressures, drain service | $100 to $200 |
| Duct inspection | Camera check, airflow and static pressure readings | $150 to $300 |
| Commercial inspection | Per-unit checklist, condition ratings, report | Custom quote |
| Home purchase inspection | Load test, camera duct check, cost estimates | $200 to $400 |
| Installation inspection | Charge, airflow, electrical, and drain checks | $150 to $300 |
| Furnace or heat strip inspection | Burner or strip tests, CO readings, safety checks | $100 to $200 |
| Permit pre-inspection | Code check at rough-in or final stage | $150 to $350 per visit |
| Heat pump inspection | Both modes tested, defrost and reversing valve checks | $125 to $250 |
