Professional New Construction Duct Cleaning Services in Waco, TX
Even carefully managed job sites send some dust into the duct system. Our crew cleans the new ductwork from end to end before move-in. We first check the layout of the new duct system and the condition of each run. We coordinate with your builder or project manager to fit the final stage of the build. Next, we connect a negative air machine to keep the duct system under suction. We clean the trunk lines and branch ducts with brushes sized to fit them, pulling sawdust and fine particles into the vacuum. Once a section is clean, we inspect it before moving on. The specific new construction duct cleaning services we provide for residential and commercial properties are listed below.
New Construction Air Duct Cleaning in Waco
Every trade on a build site creates dust, and the duct system catches it through open registers and returns long before the home gets its final clean. Our team arrives after the last trade leaves and cleans every supply and return run in the home under HEPA negative pressure. Soft-bristle rotary brushes clear dust from new flex liners, and air whips move it through long trunk lines toward the vacuum. Return plenums and filter slots get vacuumed, and new filters go in at the end. The crew records camera footage of several runs before and after cleaning for the builder's file. The home's first full cooling season starts with clean ducts and steady airflow.
New Construction HVAC Duct Cleaning in Waco
New air handlers often run during construction as temporary cooling, which pulls dust into the return plenum, the trunk lines, and the coil. Our HVAC duct cleaning team cleans the supply and return plenums and the first sections of trunk line, where construction dust collects heaviest. The coil face and blower wheel get inspected and cleaned before the system's final startup check. We confirm the filter rack fits a standard filter and that the return plenum seals tightly to the air handler. Static pressure readings get recorded so the builder has a clean baseline at handover. The new equipment begins its service life without a dust load cutting its efficiency.
New Home Duct Cleaning in Waco
Buyers often assume a new home has clean ducts, but many builders run the AC during drywall and flooring work without filtering the returns. Our air duct camera inspection pros clean new homes for buyers before closing or move-in, even when the builder's contract does not include duct cleaning. We inspect the system with a camera first and share the footage so you see what the ducts hold. The full system then gets cleaned, including registers, returns, the air handler, and the dryer vent. You receive a report and photos to keep with your new home documents. Your family moves in without breathing construction dust during the first months in the home.
New Construction Vent Cleaning in Waco
Bathroom exhaust fans, range hood vents, and dryer vents in new homes collect drywall dust and debris during construction, and many run for the first time on move-in day. We clean each exhaust fan housing and wheel and brush the duct through to its exterior cap. Dryer vents get a camera check for debris dropped in during framing, such as wood scraps or insulation. Range hood ducts get inspected for proper connection and backdraft damper movement. Every vent cap outside the home gets checked for missing flaps or screens that do not belong on dryer caps. Each exhaust vent moves air at full strength on its first day of use.
Rough-In Duct Protection in Waco
Duct openings left uncapped during framing and drywall become dust collectors for every trade that follows. Our air duct deep cleaning crew visits the site after HVAC rough-in and caps every register boot, return opening, and trunk end with plastic covers and tape. The air handler gets wrapped or sealed so construction dust cannot reach the coil or blower. We follow SMACNA guidelines for protecting HVAC systems during construction. Each capped opening gets labeled so finish carpenters know to leave it covered until final cleaning. Covers get inspected and replaced on later visits if trades tear them open. Protected systems need less cleaning at the end, which lowers final cleaning costs for builders.
Pre-Drywall Duct Inspection in Waco
Once drywall goes up, crushed, disconnected, or debris-filled ducts become hard and expensive to fix. Our post construction duct cleaning team inspects every duct run at rough-in, before insulation and drywall close the walls and ceilings. We check each run for crushing, sagging, kinks, loose connections, and debris dropped in by other trades. A quick airflow test at several boots confirms each branch connects to the trunk. Problems get photographed and reported to the builder and HVAC installer the same day. Debris gets removed on the spot when possible, and openings get recapped before we leave. The duct system goes behind the drywall in good condition, avoiding costly fixes after the home is finished.
Builder Warranty Duct Service in Waco
Many new home warranties include an 11-month walkthrough, and buyers often report dusty vents, weak rooms, or noisy returns at that visit. Waco Air Duct Cleaning Pro handles duct-related warranty items for builders, including cleaning, airflow checks, and boot sealing. We inspect the rooms the homeowner flagged, test airflow, and clean any ducts that still hold construction dust. Loose boots, crushed flex, and leaking joints found during the visit get repaired and documented. Visits get scheduled directly with the homeowner to save the builder's office time. The builder receives a report closing out each warranty item. Homeowners get their concerns fixed, and builders close warranty requests without sending their own crews.
Multifamily New Construction Duct Cleaning in Waco
New apartment and condo buildings finish units in phases, and dust from ongoing work on other floors keeps entering finished units. Our commercial HVAC duct cleaning crew cleans units floor by floor as each section reaches completion, matching the leasing or closing schedule. Each unit's air handler, supply branches, and returns get cleaned, and corridor makeup air ducts get cleaned once construction ends. Units get tagged with the cleaning date so property managers know which ones are ready. A unit-by-unit report goes to the developer and management company. Residents move into units with clean air, even while other parts of the building are still under construction.
New Construction Duct Cleaning Near Me in Waco, TX
Builders and new homeowners looking for a local crew want one that understands construction schedules and closing deadlines. Waco Air Duct Cleaning Pro serves Waco and nearby areas including Brook Oaks, Castle Heights, and Dean Highland with duct protection, inspection, and cleaning for new homes and multifamily projects. Call (254) 277-1371 to add your project to our schedule.
About Our City Waco
Residents and businesses throughout Waco can rely on our team for air duct cleaning and ventilation-care services. We proudly serve local areas such as Brook Oaks, Castle Heights, and Dean Highland, helping customers address dusty registers, buildup inside accessible ducts, and questions about system cleanliness. Our work centers on thorough inspection and cleaning of relevant duct and vent components, giving property owners a straightforward way to maintain their heating and cooling air pathways. We aim to make the process straightforward by explaining which ventilation sections need attention.
New Construction Duct Cleaning Cost in Waco, TX
New construction cleaning prices depend on the home's size, the number of systems, and whether the project includes rough-in protection or only a final cleaning. Most new homes in Waco cost between $400 and $900 for a final duct cleaning, and builders who add rough-in protection often see lower final cleaning costs. Builders can request per-lot pricing for whole communities.
| Service | What is Included | Typical Cost |
|---|---|---|
| Final duct cleaning | Supply and return runs, HEPA extraction, filters, photo report | $400 to $900 |
| Air handler and plenum cleaning | Plenums, coil, blower, static pressure baseline | $200 to $450 |
| Buyer pre-closing cleaning | Camera inspection, full cleaning, dryer vent, report | $450 to $950 |
| Exhaust and dryer vent cleaning | Bath fans, range hood duct, dryer vent, cap checks | $150 to $350 |
| Rough-in duct protection | Capping, air handler wrap, labeling | $150 to $350 per home |
| Pre-drywall duct inspection | Run-by-run check, debris removal, photo report | $150 to $300 |
| Warranty duct service | Airflow checks, cleaning, boot and joint repairs | Custom per-visit quote |
| Multifamily unit cleaning | Unit air handler, branches, returns, unit tags | Custom per-unit quote |
